The Si-6S series provides a SMART solution to ever-complicated injection molding process.

Photographs in the catalog include optional devices.

For the improvement of the product, the appearance and specification are subject to change without notice.

Specifications are expressed in SI units : 1MPa=10.2kgf/cm2, 1kN=0.102tonf

Maximum injection pressure is a maximum settable value.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Maximum injection speed is calculated values. This value may be limited by the setting of injecting pressures.

* When set to MAX. injection speed or MAX. pressure, injection stroke. or speed is regulated automatically.

* Only wear resistant specification is available for the screw and heat barrel of D150HE (CH300E), DH300E, CH450E.

The Si-6S series provides a SMART solution to ever-complicated injection molding process.

Photographs in the catalog include optional devices.

For the improvement of the product, the appearance and specification are subject to change without notice.

Specifications are expressed in SI units : 1MPa=10.2kgf/cm2, 1kN=0.102tonf

Maximum injection pressure is a maximum settable value.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Maximum injection speed is calculated values. This value may be limited by the setting of injecting pressures.

* When set to MAX. injection speed or MAX. pressure, injection stroke. or speed is regulated automatically.

* Only wear resistant specification is available for the screw and heat barrel of D150HE (CH300E), DH300E.

The Si-6S series provides a SMART solution to ever-complicated injection molding process.

Photographs in the catalog include optional devices.

For the improvement of the product, the appearance and specification are subject to change without notice.

Specifications are expressed in SI units : 1MPa=10.2kgf/cm2, 1kN=0.102tonf

Maximum injection pressure a maximum settable value.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Maximum injection speed is calculated values. This value may be limited by the setting of injecting pressures.

* When set to MAX. injection speed or MAX. pressure, injection stroke. or speed is regulated automatically.

* Only wear resistant specification is available for the screw and heat barrel of B55E（φ16）, BH150E, D150HE (CH300E), DH300E.

Realization of high-speed, high-quality two-color

The figures are subject to change without any legal obligation on the part of the manufacture.

The specifications are expressed in SI units : 1MPa=10.2kgf/cm2、1kN=0.102tonf

The maximum injecting pressure is a maximum settable value.

The maximum injecting speed is calculated values. This value may be limited by set injecting pressures.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Figures in 【　　】 are optional.

Realization of high-speed, high-quality two-color

The figures are subject to change without any legal obligation on the part of the manufacture.

The specifications are expressed in SI units : 1MPa=10.2kgf/cm2、1kN=0.102tonf

The maximum injecting pressure is a maximum settable value.

The maximum injecting speed is calculated values. This value may be limited by set injecting pressures.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Figures in 【　　】 are optional.

The CS series is the latest electric injection molding machine produced Toyo Changshu plant in China, inheriting the DNA of time-tested CS series featuring the concept of SMART MOLDING.

Photographs in the catalog include optional devices.

For the improvement of the product, the appearance and specification are subject to change without notice.

Specifications are expressed in SI units : 1MPa=10.2kgf/cm2, 1kN=0.102tonf

Maximum injection pressure is a maximum settable value.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Maximum injection speed is calculated values. This value may be limited by the setting of injecting pressures.