TOYO'S value-up options series

SMART MOLDING - TOYO MACHINERY & METALProduct Information

Hopper area maintenance platform

  • The hopper area maintenance platform provides a roomy space to secure safety in conducting maintenance, cleaning and setup works around the material feeding area in large-sized machines.
  • Photo_Hopper area maintenance platform

Mold cooling water flow rate monitor

  • The mold cooling water flow rate monitor allows you to observe the flow rate of the water running in the mold cooling water piping on the screen of the molding machine. You can quickly realize any flow rate changes when the cooling piping is clogged or the same mold is used on a different molding machine, which contributes to constant molding conditions.
  • Photo_Mold cooling water flow rate monitor

Heavy duty injection pressure specification

  • The heavy duty injection pressure specification is applicable to thick-wall moldings where holding pressure needs to be applied for a long time. In this specification, the load of the injection servomotor is reduced by changing the gear ratio of the injection driving unit.
  • Photo_Heavy duty injection pressure specification

Low machine frame specification

  • The low machine frame has reduced the machine height, resulting in better visibility of the factory, easier access to the mold area, easier maintenance and improved safety. The low machine frame is realized by bringing the machine control equipment out of the frame.
  • Photo_Low machine frame specification

2-material molding specification

  • This 2-material molding specification allows you to change the ordinary horizontal molding machine into the T-shaped 2-material molding machine, by just connecting a sub injection unit on the pre-arranged mounting base on the back of the machine frame. One molding machine can be served as an ordinary machine or a 2-material machine.
  • Photo_2-material molding specification

T-Station lite

  • With the T-Station lite, you can easily establish your own production monitoring system using a general PC without using a server. At the show site, you will see our demonstration using a tablet PC, where monitorings of various conditions such as machine operation, product quality and molding conditions are being made.
  • Photo_T-Station lite
  • >> For more information , click here (PDF)

Specifications for use in clean room

  • In these specifications, the mold clamping unit of the molding machine is provided with electroless nickel plating platens, covers made of stainless plate and a clean module unit. The down blow from the clean module unit keeps the mold area in a cleanliness of class 1000.
  • Photo_Specifications for use in clean room