Si-1300-6Si-1300-6

https://www.toyo-mm.co.jp/english/product/spec/si-1300-6.htmlhttps://www.toyo-mm.co.jp/english/product/spec/si-1300-6.html

Si-1300-6 is a new model in the Si-6 series, having an ejection stroke long enough for deep moldings.

Photographs in the catalog include optional devices.

For the improvement of the product, the appearance and specification are subject to change without notice.

Specifications are expressed in SI units : 1MPa=10.2kgf/cm2, 1kN=0.102tonf

Maximum injection pressure is a maximum settable value.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Maximum injection speed is calculated values. This value may be limited by the setting of injecting pressures.

Cookie Policy

https://www.toyo-mm.co.jp/english/cookie.html
This website operated by Toyo Machinery & Metal (hereinafter called “TOYO”), with its principal place of b Read more...

Si-6 series

https://www.toyo-mm.co.jp/english/pro/servo-motor-driven-injection/si-6.html
>> Si-30-6EP series Features Si-6 series Features The Si-6 series provides a SMART solution to ever-complicate Read more...

Si-950(1000)-6SSi-950(1000)-6S

https://www.toyo-mm.co.jp/english/product/spec/si-950-1000-6s.htmlhttps://www.toyo-mm.co.jp/english/product/spec/si-950-1000-6s.html

The Si-6S series provides a SMART solution to ever-complicated injection molding process.

Photographs in the catalog include optional devices.

For the improvement of the product, the appearance and specification are subject to change without notice.

Specifications are expressed in SI units : 1MPa=10.2kgf/cm2, 1kN=0.102tonf

Maximum injection pressure is a maximum settable value.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Maximum injection speed is calculated values. This value may be limited by the setting of injecting pressures.

【】for option.This option is not available after shipment.

Si-6S series

https://www.toyo-mm.co.jp/english/pro/servo-motor-driven-injection/si-6s.html
Si-6S series Features Based on previous Si-6 series, the Si-6S series is furnished with a renovated control sy Read more...

Si-850-6SSi-850-6S

https://www.toyo-mm.co.jp/english/product/spec/si-850-6s.htmlhttps://www.toyo-mm.co.jp/english/product/spec/si-850-6s.html

The Si-6S series provides a SMART solution to ever-complicated injection molding process.

Photographs in the catalog include optional devices.

For the improvement of the product, the appearance and specification are subject to change without notice.

Specifications are expressed in SI units : 1MPa=10.2kgf/cm2, 1kN=0.102tonf

Maximum injection pressure is a maximum settable value.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Maximum injection speed is calculated values. This value may be limited by the setting of injecting pressures.

* The heat barrel (φ83) for the L750E Injection unit is not compatible with that of the K600E.

Si-680(700)-6SSi-680(700)-6S

https://www.toyo-mm.co.jp/english/product/spec/si-680-700-6s.htmlhttps://www.toyo-mm.co.jp/english/product/spec/si-680-700-6s.html

The Si-6S series provides a SMART solution to ever-complicated injection molding process.

Photographs in the catalog include optional devices.

For the improvement of the product, the appearance and specification are subject to change without notice.

Specifications are expressed in SI units : 1MPa=10.2kgf/cm2, 1kN=0.102tonf

Maximum injection pressure is a maximum settable value.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Maximum injection speed is calculated values. This value may be limited by the setting of injecting pressures.

【】for option.This option is not available after shipment.

* The heat barrel (φ83) for the L750E Injection unit is not compatible with that of the K600E.

Si-550-6SSi-550-6S

https://www.toyo-mm.co.jp/english/product/spec/si-550-6s.htmlhttps://www.toyo-mm.co.jp/english/product/spec/si-550-6s.html

The Si-6S series provides a SMART solution to ever-complicated injection molding process.

Photographs in the catalog include optional devices.

For the improvement of the product, the appearance and specification are subject to change without notice.

Specifications are expressed in SI units : 1MPa=10.2kgf/cm2, 1kN=0.102tonf

Maximum injection pressure is a maximum settable value.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Maximum injection speed is calculated values. This value may be limited by the setting of injecting pressures.

* The heat barrel (φ83) for the L750E Injection unit is not compatible with that of the K600E.

Si-RW series

https://www.toyo-mm.co.jp/english/pro/two-color/si-rw.html
Si-RW series Features NEW Realization of high-speed, high-quality two-color/dissimilar-material injection mold Read more...

Si-450-6SSi-450-6S

https://www.toyo-mm.co.jp/english/product/spec/si-450-6s.htmlhttps://www.toyo-mm.co.jp/english/product/spec/si-450-6s.html

The Si-6S series provides a SMART solution to ever-complicated injection molding process.

Photographs in the catalog include optional devices.

For the improvement of the product, the appearance and specification are subject to change without notice.

Specifications are expressed in SI units : 1MPa=10.2kgf/cm2, 1kN=0.102tonf

Maximum injection pressure is a maximum settable value.

Maximum injection pressure may be limited by the molding conditions and the cycle time.

Maximum injection speed is calculated values. This value may be limited by the setting of injecting pressures.